|  |  TurboXS Lancer Evolution 8/9 UTEC
The Evo UTEC plugs directly into the wiring harness of your Lancer Evo, and has user-adjustable fuel, timing, and boost maps, so you can infinitely adjust the performance parameters of your Evo, without ever having to send in your ECU for re-programming.
Programming is accomplished by any PC, or even with a PDA running terminal software. You can create up to four separate programs, plus "stock" mode, that are selectable on the fly. (No need to get out the laptop to switch from your pump gas program to your race gas program, for example.) Please note: You MUST have a PC or palmtop with a terminal program to make any adjustments to the UTEC. The interface is RS-232, but a USB-to-RS-232 cable will also work, as will a Palm-to-RS-232 cable.
The UTEC's built-in software means there's nothing to install on your PC -- the software is inside the UTEC. That means no disks to keep track of, no annoying "dongle" hardware keys, and no worries about PC compatibility.
The UTEC's ability to fine-tune the car blows away any device anywhere near its price range. You can alter fuel, timing and boost parameters every 250 rpms, over ten "load sites." You can program for larger injectors, you can advance or retard spark timing, you can adjust for manifold pressure, you can set boost according to throttle position and rpm...these are just some of the incredible features.
UTEC kit includes the UTEC with plug-and-play ECU wiring harness, an auxiliary boost controller, a protective cover, and serial cable.
Clearance item missing aux boost controller
|
|
|
| |