|  |  Fuel Injector Connectors
So... you've pulled off the connectors to your fuel injectors and managed to break one side of them. Now they won't stay on and that blob of RTV just isn't very pretty or effective.
This set of 4 injector connectors is just what you need. They have a different style of locking in place so you won't get frustrated and end up breaking the connector. Also, losing that little metal clip that loves to disappear into the depths of the intake manifold will be a thing of the past.
Simply get some high quality wire, crimp on the connector tabs, insert them into the connector, and splice into the existing injector harness. Soldiering is recommened for longevity.
Make sure to put the wires on exactly as they came off!
|
| Assembled Fuel Injector Connector SetWe take the above injector connector set and assemble them with about 8" of special type SXL; thick wall, special purpose automotive wire which is insulated with chemically cross-linked polyethylene. Withstands prolonged temperatures of up to 257ºF without melting or fusing. Operates optimally between the extreme temperatures of -49ºF to 257ºF which means it will last unprotected under your hood. Resistant to mosture and most solvents.
| |
|
|
| |